1.5mm HDPE Dual-Color Geomembrane

Superior Mechanical Performance

  • Reinforced scrim layer provides ≥35/30 kN/m tensile strength (MD/XD)

  • 800N+ puncture resistance - ideal for rocky subgrades

  • <5% thickness variation across full roll width

Advanced Coating Benefits

  • UV-resistant top coating with 5,000-hour weatherability

  • Chemical-resistant formulation (pH 0.5-14 stability)

  • Anti-static coating option for hazardous environments

Installation Excellence

  • Optimized weldability - 20% faster seam completion vs standard HDPE

  • Pre-fabricated panels available for large projects

  • Low-temperature flexibility maintains performance to -70°C

Product Details

Quality control in geomembrane installation has always been a challenge. Weld defects are hard to see on a black liner. Punctures blend into the dark surface. Inspectors rely on vacuum boxes and spark testing to find problems. The 1.5mm HDPE Dual-Color Geomembrane changes that approach. This product features two distinct colored layers that create visual contrast. When a weld is incomplete or a puncture occurs, the contrasting color appears. The damage becomes visible to the naked eye. At 1.5mm thick, the 1.5mm HDPE Dual-Color Geomembrane provides the same puncture resistance and chemical barrier as standard HDPE, plus visual quality assurance that standard liners lack. For landfill liners, mining containment, and potable water reservoirs, this HDPE Geomembrane adds a layer of inspection that traditional materials cannot match.


1.5mm HDPE Dual-Color Geomembrane


Product Overview

The 1.5mm HDPE Dual-Color Geomembrane is manufactured through a co-extrusion process that bonds two colored HDPE layers into a single sheet. The contrasting colors—typically black/white, green/black, or custom combinations—create a visual indicator that reveals damage and weld quality at a glance.

The total thickness is 1.5mm (60 mils), with each color layer contributing to the overall thickness. The material is produced from virgin high-density polyethylene resin with carbon black content held at 2.0-3.0% for permanent UV stabilization.

As a Geomembrane Liner, this product offers permeability below 1.0×10⁻¹³ cm/s. The dual-color construction does not compromise the barrier properties of the material. The HDPE Liner maintains the same chemical resistance, puncture resistance, and tensile strength as standard single-color HDPE geomembranes.


The visual contrast layer enables:

Weld quality verification - incomplete welds show color mismatch

Damage detection - punctures or tears reveal the underlying color

Thickness consistency checks - thin spots appear as color variations


Product Features

Visual Quality Control Layer. The 1.5mm HDPE Dual-Color Geomembrane features contrasting color layers that reveal damage and weld defects immediately. An incomplete weld shows the underlying color. A puncture exposes the lower layer. This visual indicator speeds up inspection and catches problems that might otherwise go unnoticed.

Permanent UV Protection. Carbon black is compounded throughout both layers at 2.0-3.0%. This is not a surface coating. The 1.5mm HDPE Dual-Color Geomembrane maintains UV resistance even if the surface is scratched during installation.

Near-Zero Permeability. The coefficient of permeability measures below 1.0×10⁻¹³ cm/s. Water, leachate, and process solutions do not migrate through the Geomembrane Liner.

Broad Chemical Resistance. The HDPE Geomembrane withstands exposure to acids, bases, and hydrocarbons across a pH range of approximately 0.5 to 14. No swelling, softening, or cracking occurs under normal operating conditions.

High Puncture Resistance. At 1.5mm thickness, puncture resistance reaches approximately 480 N per ASTM D4833. Some manufacturer specifications list 800N+ for dual-color products with reinforcing scrim layers.

Excellent Tensile Properties. Tensile strength at yield is approximately 22-23 kN/m in both machine and cross-machine directions. Elongation at break exceeds 700%, allowing the HDPE Liner to accommodate subgrade settlement without rupture.

Stress Crack Resistance. The material achieves stress crack resistance exceeding 300 hours per ASTM D5397. This is critical for long-term performance under sustained loads.

Installation Advantages. The color contrast reveals incomplete welds, installation damage, and stress points that would be invisible on a single-color liner. Inspectors can identify problems immediately without specialized testing equipment.


1.5mm HDPE Dual-Color Geomembrane


Product Advantages

Faster Quality Assurance Inspections. The 1.5mm HDPE Dual-Color Geomembrane reduces inspection time by up to 30%. Visual inspection catches weld defects and damage immediately. No waiting for vacuum box testing on every seam. The contrast layer shows quality issues that would otherwise require specialized equipment to detect.

Early Leak Detection Through Color Differentiation. A puncture that occurs during backfilling is immediately visible. The contrasting color appears at the damage site. Repair crews can mark and patch the area without searching for small defects. This early detection prevents leaks that would only be discovered after the pond or landfill is in service.

Custom Color Combinations for Project Specifications. The 1.5mm HDPE Dual-Color Geomembrane can be produced in various color combinations—black/white, green/black, or custom colors. This allows project engineers to specify colors that provide the best visual contrast against their subgrade or cover materials.

No Compromise on Mechanical Performance. The dual-color construction does not reduce the physical properties of the HDPE Geomembrane. Tensile strength, puncture resistance, and stress crack resistance meet or exceed standard single-color HDPE specifications. The visual indicator is an additional benefit, not a trade-off.

Wider Application Range. The visual quality control layer makes the Geomembrane Liner suitable for critical applications where inspection is paramount—landfill liners, mining heap leach pads, and potable water reservoirs. The same 1.5mm HDPE Dual-Color Geomembrane that provides visual QA also delivers the mechanical performance required for these demanding applications.


Technical Specifications

Nominal Thickness 1.50 mm ±0.10 ASTM D5199
Density ≥0.940 g/cm³ ASTM D1505
Carbon Black Content 2.0-3.0% ASTM D4218
Tensile Strength at Yield ≥22 kN/m ASTM D6693
Tensile Strength at Break ≥40 kN/m ASTM D6693
Elongation at Break ≥700% ASTM D6693
Tear Resistance ≥187 N ASTM D1004
Puncture Resistance ≥480 N ASTM D4833
Stress Crack Resistance ≥300 hours ASTM D5397
Permeability <1.0×10⁻¹³ cm/s ASTM E96
Roll Width 3.0m to 8.0m Custom
Roll Length 50m to 150m Custom


Product Applications

Landfill Liners and Caps. The 1.5mm HDPE Dual-Color Geomembrane provides the primary barrier in municipal and hazardous waste landfills. The visual layer speeds up seam inspection across thousands of linear meters of welds. Damage from cover soil placement is immediately visible and repairable.

Mining Leachate Ponds. Copper and gold heap leach pads use the HDPE Geomembrane for containment. The dual-color construction helps inspectors identify punctures from sharp ore that would otherwise be invisible on black liner. Early detection prevents solution loss and groundwater contamination.

Potable Water Reservoirs. Water storage facilities require liners with documented quality assurance. The Geomembrane Liner with visual contrast layer provides inspectors with immediate evidence of weld quality and liner integrity. When specified with NSF/ANSI 61 certification, the material is approved for drinking water contact.

Secondary Containment. Tank farms and chemical storage areas use the HDPE Liner for secondary containment. The visual layer reveals damage from maintenance activities or equipment movement. Quick repairs maintain containment integrity.

Decorative and Agricultural Ponds. Large decorative lakes and irrigation reservoirs benefit from the visual quality control of dual-color construction. Installation crews can identify and repair damage before the pond fills, preventing costly draining after commissioning.


Packaging and Transport

The 1.5mm HDPE Dual-Color Geomembrane is wound onto heavy-wall cardboard cores with minimum 250mm inner diameter to prevent core collapse during crane lifting. Each roll is wrapped in opaque white polyethylene film with UV inhibitors to protect the outer wraps during storage and transit.

Corner protectors are fitted to both roll ends. The wrapped roll is secured to a hardwood pallet using steel strapping with edge protection.

For ocean freight, rolls are loaded into 20-foot or 40-foot containers. Palletized rolls are braced with inflatable dunnage bags or dimensional lumber to prevent shifting during transit.

Shipping documentation includes commercial invoice, packing list, and certificate of analysis. Third-party inspection reports from SGS, Bureau Veritas, or TÜV are available on request.


Company Profile

The manufacturing facility operates multiple extrusion lines dedicated to HDPE Geomembrane production. Daily output capacity supports large-scale projects. Co-extrusion technology enables production of dual-color geomembranes with consistent layer thickness and color contrast.

Quality management systems hold ISO 9001 certification. Finished product is tested to GRI-GM13 and ASTM standards. Laboratory personnel perform physical property testing on every production lot.

The technical team can support 1.5mm HDPE Dual-Color Geomembrane installations with guidance on welding procedures, subgrade preparation, and quality assurance inspection methods.


1.5mm HDPE Dual-Color Geomembrane


Frequently Asked Questions

Q: How does the dual-color feature improve quality control?

A: The contrasting color layers reveal weld defects and damage immediately. An incomplete weld or puncture exposes the underlying color. Inspectors can identify problems without specialized equipment, reducing inspection time by up to 30%.


Q: Does the dual-color construction affect mechanical properties?

A: No. The 1.5mm HDPE Dual-Color Geomembrane meets the same tensile strength, puncture resistance, and stress crack requirements as single-color HDPE. The visual layer is an additional benefit, not a trade-off.


Q: What color combinations are available?

A: Common combinations include black/white and green/black. Custom color combinations are available for project specifications.


Q: Is this product suitable for potable water contact?

A: Yes, when specified with NSF/ANSI 61 certification. The HDPE Geomembrane can be manufactured using resin formulations approved for drinking water contact.


Q: How is the dual-color liner welded in the field?

A: Thermal fusion welding using standard hot wedge equipment. The color contrast helps welders verify seam quality immediately. The same welding procedures apply as for single-color HDPE.


Q: What is the minimum order quantity?

A: For standard Geomembrane Liner, minimum orders typically start at one 20-foot container. Smaller quantities may be available through LCL consolidation.


Q: Can samples be obtained before ordering?

A: Yes. Sample swatches of 1.5mm HDPE Dual-Color Geomembrane are available on request.


Q: What is the typical lead time for orders?

A: Standard orders ship within 15-30 days after confirmation. Large projects may require advance scheduling.


Q: Does the product carry third-party certifications?

A: Yes. The HDPE Liner is tested to GRI-GM13 and ASTM standards. ISO 9001 certification covers the quality management system. SGS and TÜV inspection reports are available.


Summary

The 1.5mm HDPE Dual-Color Geomembrane adds visual quality control to the proven performance of HDPE containment. The contrasting color layers reveal weld defects and damage immediately, speeding up inspection and catching problems before they become leaks. At 1.5mm thickness, the Geomembrane Liner provides the puncture resistance, chemical barrier, and long-term durability that critical applications require.

For landfill liners, mining heap leach pads, and potable water reservoirs, the HDPE Geomembrane with dual-color construction offers an additional layer of assurance. The visual indicator does not compromise mechanical properties—it simply makes quality control easier and more reliable.

Project engineers and specifiers seeking the 1.5mm HDPE Dual-Color Geomembrane should contact the technical sales team with project requirements. A detailed quote, product samples, and installation guidance will follow.


Leave your messages

Related Products

x

Popular products

x
x